MOT:MPC565

aus RoboWiki, der freien Wissensdatenbank

(Weitergeleitet von MPC565)
vergrößern

The MPC565 is a member of a MPC500 family of microprocessors that implements the PowerPC instruction standard architecture. The MPC565 is integrated with a Floating Point Unit, an advanced peripheral set and one megabyte of FLASH memory on a single chip. This combination is ideal for high performance automotive applications as well as other control-intensive applications.

Freescale also offers a multi-output power supply device, the MC33394, which provides the voltage levels and sequencing necessary to allow plug and play use of the MPC500 family. Refer to the Related Links section of this product summary page to view information on the MC33394.


[bearbeiten]

MPC565 Features

1M byte of internal FLASH memory (divided into two blocks of 512K bytes)

  • 36K bytes Static RAM
  • Three time processor units (TPU3)
  • A 22-timer channel modular I/O system (MIOS14)
  • Three TouCAN modules
  • Two enhanced queued analog system with analog multiplexors (AMUX) for 40 total analog channels. These modules are configured so each module can access all 40 of the analog inputs to the part.
  • Two queued serial multi-channel modules, each of which contains a queued serial peripheral interface (QSPI) and two serial controller interfaces (SCI/UART)
  • A J1850 (DLCMD2) communications module
  • A NEXUS debug port (class 3) – IEEE-ISTO 5001-1999
  • JTAG and background debug mode (BDM)


http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC565&nodeId=016246PCbf8648

Von "http://robowiki.rids.de/MOT:MPC565"
'Persönliche Werkzeuge